Grinding Stones & Sanding Belts


SAE-GS-013 - 4'' CBN Cast/Medsteel (WVN863332C)

Grinding Stones & Sanding Belts

DESCRIPTION  

  • Best grinding stone for cast iron & medium steel

  • Cooler, faster & cleaner cutting

  • Lasts up to 10 times longer than traditional stones

Colour

Diamond

Match the stone to the material:

Most flywheels are cast iron (soft) but there is an increasing number of cast steel (medium) many trucks, buss’s and agricultural: billet steel (hard) many new European models including VW & late model V8 GM vehicles

How to test a flywheel for Hardness:

For good results, softer flywheels need to be ground with harder stones. Harder flywheels need softer stones. To determine flywheel hardness; spark test a flywheel before grinding. Using whatever grinding wheel is on the machine briefly touch it to the flywheel and watch the sparks fly.

Cast Iron: Soft, sparks make a deep red-orange spark that travels only a short distance before burning out.

Cast Steel: Medium, sparks are a light orange to golden, travel further than cast.

Billet Steel: Very hard, spark is bright yellow to white and travels a long distance

Note: 

If the stone wears rapidly, it’s likely too soft, try one harder. If it glazes or loads up it’s likely too hard. Try one softer

Coolant: It is absolutely critical that a good quality coolant is used. SAE 1023 is an excellent product. Note: no more than 3% should be used. More is not better as it will load the wheel i.e. becomes soapy and clogged.

SKU SAE-GS-013