Parts Washers

SAE Parts Washers are designed to answer all parts washing requirements for automotive and industrial workshops where cleaning machine parts is a necessary part of the job process.

Our range of washers are either manual washers for smaller parts for engines, brakes, transmissions or working in confined spaces where parts are placed in a solvent solution and hand washed or machine washers for larger pieces of equipment with a rotating basket and spray arms similar to a domestic dishwasher.

The range of parts washers /cleaners includes small washers for parts up to 32" in length, Undercar washers, Jetwashers (also known as Spray or Spin Washers) for washing parts up to 500KG and Bead Blasters for Cleaning DRY metal parts/components in a cabinet with garnet sand or similar abrasive

Whatever your automotive or industrial parts cleaning needs we have you covered at SAE Specialised Auto Equipment

SAE 32

The SAE 32 parts washer and degreaser is a manual parts washer for automotive and industrial mechanical workshops used for cleaning auto and industrial parts up to 32"in length.

The washer uses a solvent to loosen the dirt, grime, oil or carbon from the engine parts and as this economical parts washer uses 40% less solvent than competitors and because of its unique water filtration system the solvent lasts 2- 3 times longer than competitive parts washers.

The SAE 32 parts washer is made in Australia from long lasting welded 16 gauge steel finished in baked Durethane sitting on a 95 litre capacity polyethylene drum.

Technical Characteristics	SAE 32
Length	32" - 813mm
Width	22" - 559mm
Depth	10" - 254mm
Height: - closed	37" - 940mm
Height: - open	60" - 1524mm
Drum Capacity	95 Litres
Solvent Required	60 Litres
Weight: Tub Fittings	31 Kilos
Weight: Solvent Drum	8 Kilos
Electrics	240 Volt. 50 Cycle

SAE 1340 - Parts Washer

The largest model in the SAE parts washer range the SAE 1340 parts washer can accommodate parts or components up to 1200cm in length it has no peer in the automotive or industrial parts washing category.

Finished in baked Durethane or Stainless steel, it uses 80 litres of solvent, has a tank capacity of 180 litres and features a 240v pump and safety fusible link

Technical Characteristics	SAE 1340
Length	1200mm
Width	750mm
Depth	450mm
Height (closed)	1110mm
Height (open)	1810mm
Drum Capacity	180 Litres
Solvent Required	80 Litres
Weight	50 Kilos
Electrics	240 Volt. 50 Cycle

SAE 500 Under Car Cleaner / Washer

The SAE500 is a manual washer is for undercar washing and ideal for automotive, brake and transmission shops. The SAE 500 washer is on wheels, light and with a low profile it is easy to move between vehicles. The SAE 500 under car washer is powered by an air pump with a capacity of 6 litres per minute. The air pump re-circulates solvent through the "flow through" brush and used solvent falls back into the washer. An air flow blow off gun removes any excess solvent from the vehicle leaving it clean and spotless.

Length 850mm
Width 550mm
Tank Capacity 20 litres
Pump Capacity 6 1 p/m