The SAE Jumbo Zeca Exhaust Gas Extractor is designed to operate in any size workshop and is an ideal alternative to fixed space consuming, expensive systems. Suitable for use on cars, vans, motorcycles, light commercials, it allows a mechanic to work on the vehicle with the engine running with the exhaust gases extracted so not contravening O H &S regulations.
Designed as a go anywhere vehicle exhaust fumes extractor, it is mounted on a robust metal trolley with simple and easy-to-adjust height and suction settings. This exhaust fume extractor doesn't cause problems when using a C.O. Meter, as it has no clips and is not attached to the exhaust hose and therefore, will not foul the C.O. Meter pick-up probe.
The Jumbo Zeca Exhaust Gas Extractor outlet hose has a quick fit collar to capture all the gas emissions at the exhaust outlet for easy disconnection when moving from one location to another.
The unit is powered by a 220 Volt engine. 50Hz. Protection degree IP54.
Supplied with 10m of power cable, 6m plasticized heat-resistant (130°) ducting hose 120mm diameter, supported by a steel wire helix incorporated within 2 textile plies covered with self-extinguishing PVC.
• Capacity 410m3/h.
• Max length outlet hose 30m.
• Max height outlet hose 12m.
Art. 673 - Exhaust gas extractor with trolley and 6 m hose.
Art. 678 - Additional Ducting Hose (6 metres).
Art. 679 - High Frame Adjustment Pillar, for use of the unit up to 110cm from ground.